As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This eskimo s33q8 sting ray 33cc review covers a gas-powered ice auger built for cold conditions. It features a 33cc two-cycle engine and an 8-inch Quantum auger. The tool weighs 25 pounds and measures 54 inches long. You get stainless steel blades and a centering ring for accurate re-drilling. The wide-wing handlebars absorb vibration, and the mitten-grip recoil helps you start the engine in cold weather. This setup targets ice anglers who need reliable power and precision on the ice.

  • 33cc two-cycle engine designed for cold-weather performance
  • 8-inch Quantum auger with a unique centering ring for re-drilling
  • Stainless steel blades that hold their edge in dirty ice
  • All-metal transmission for optimum gearing
  • Mitten-grip recoil for starting with gloves on

Good fit for

This auger suits ice anglers who drill multiple holes or fish on uneven ice. The 8-inch diameter and centering ring help you re-drill old holes accurately. The 33cc engine provides steady power, while the stainless blades resist wear in dirty ice. If you value precise power control via the fingertip throttle and reduced vibration from the foam-covered handlebars, this model fits your needs. It is ideal for those who prefer gas power over electric systems.

Who can skip it

You should look elsewhere if you prefer lightweight gear. At 25 pounds, this auger is heavier than many electric alternatives. The 54-inch length and 11-inch width require storage space you may not have. If you want a quieter operation, the two-cycle gas engine may not suit you. Additionally, if you fish in areas with strict noise regulations, the gas-powered nature of this tool might be a drawback. Consider a smaller, electric model if weight and noise are your top priorities.

Verdict

The Eskimo S33Q8 offers durable, gas-powered performance with precision features for re-drilling. It is a solid choice for anglers who prioritize power and accuracy over lightweight portability.

Key specs for this auger

Engine Displacement: 33cc

The engine has a displacement of 33cc. This size provides enough torque to cut through thick, hard ice without stalling. You will find this power level suitable for most standard ice fishing conditions. It balances speed with fuel efficiency. If you frequently drill through dense, layered ice, this displacement helps maintain consistent cutting pressure. Larger engines offer more power but weigh more, so this 33cc unit is a practical middle ground for most anglers.

Auger Diameter: 8-Inch

The auger head is 8 inches wide. This diameter is the standard size for most ice fishing shelters and chairs. It creates a hole large enough for your gear and fish to pass through easily. You should verify that your shelter floor opening matches this size before buying. Smaller augers create tighter holes that can be harder to clear of slush. This 8-inch width is a safe choice for general use, ensuring compatibility with standard equipment found in most ice fishing setups.

Weight: 25 pounds

The unit weighs 25 pounds. This weight is manageable for carrying across flat ice but may feel heavy when dragging over rough terrain or up steep banks. You will need to consider how you transport the auger to your spot. Heavier augers often feel more stable during cutting, but portability is a key factor. If you hike long distances to reach your fishing hole, a lighter model might be better. For vehicle access, this weight is acceptable for most users.

Power Source: 2-Cycle Gas

This auger runs on a two-cycle gas engine. You must mix oil with gasoline to fuel it, which requires preparation before each use. Gas engines typically offer more power than electric models, making them ideal for cold weather where battery performance drops. You will need to manage fuel levels and carry extra gas on the ice. This power source is best for anglers who prioritize cutting speed and reliability in extreme cold over convenience and zero emissions.

Design and Build Overview

The listing describes a 25-pound unit with a 54-inch length and 11-inch width. This mass helps you maintain stability on the ice. The frame uses tubular steel handlebars covered in foam. This material choice absorbs vibration during operation. You get a wide-wing layout for better leverage when pushing through frozen water. The finish is red, which improves visibility against white snow.

Controls include a fingertip throttle trigger for precise power management. You can adjust speed without removing your hands from the grips. The recoil starter features a mitten-grip design. This allows you to start the engine while wearing heavy winter gloves. The listing notes a stainless centering point to keep the auger stable on uneven surfaces. This component helps when you need to re-drill existing holes.

The build includes an all-metal transmission for optimum gearing. According to the listing, this transmission supports the 33cc two-cycle engine. The 8-inch Quantum auger uses precision stainless steel blades. A blade protector is included to extend blade life. These materials suggest a focus on durability in dirty ice conditions. The overall design prioritizes cold-weather functionality and structural integrity over lightweight portability.

Setup And Daily Use Guide

Setting up this auger begins with fueling the 33cc two-cycle engine. The listing specifies a fingertip throttle trigger, which allows you to adjust power output precisely before you start. You engage the engine using the mitten-grip recoil starter. This design ensures you can pull the cord effectively even while wearing thick winter gloves, a common requirement on the ice. The wide-wing tubular steel handlebars provide a stable grip. The foam covering on these steel bars helps absorb vibration during operation, reducing fatigue in your hands as you hold the unit steady.

In daily use, the 8-inch Quantum auger is the primary cutting tool. Its unique centering ring makes re-drilling old holes straightforward. You do not need to guess the hole location. The stainless centering point keeps the auger stable on uneven ice surfaces. This feature prevents the bit from wandering when you are working on thin or irregular ice sheets. The precision stainless steel blades are designed to hold their edge longer, especially in dirty ice conditions. A blade protector is included to help extend the life of these cutting edges when you are not using the tool.

The all-metal transmission offers optimum gearing for consistent power delivery. This mechanical setup supports the engine’s torque without slipping. You handle the 25-pound weight by gripping the foam-covered bars. The 54-inch length and 11-inch width give you ample room to maneuver. The red color provides visibility against white snow. This auger suits anglers who need reliable, repeatable hole cutting in cold environments. The gas power source means you do not rely on batteries for each session.

Before You Buy This Auger

You need to prepare for the maintenance this two-cycle engine demands. You must mix fresh oil with gasoline before every use. Old fuel can damage the carburetor quickly. You should also buy extra blades. The listing notes stainless steel blades last longer, but dirty ice wears them down. Check your local ice fishing regulations regarding gas-powered tools. Some parks ban them. You need a sturdy case for transport. This auger weighs 25 pounds and is quite long. You will need a rack or large trunk space. Compare this model to electric options if you fish in noisy areas. The vibration from the metal transmission and engine is noticeable. You might prefer quieter tools for crowded spots. Ensure you have room to store the fuel safely. This gear suits dedicated anglers who drill many holes.

Check before you buy

  • Check if gas augers are allowed at your fishing spot
  • Buy high-quality two-cycle oil for proper fuel mixing
  • Ensure you have storage space for the 54-inch length
  • Purchase replacement stainless steel blades for dirty ice conditions
1
Eskimo S33Q8 33cc Gas Ice Auger

Eskimo S33Q8 33cc Gas Ice Auger

Best for: precise control and re-drilling in dirty ice

Auger Diameter
8-Inch
Power Source
2-Cycle Gas
Weight
25 pounds
Engine Displacement
33cc
Fishing Type
Ice Fishing
Dimensions
54 × 11 × 23 inches

This Eskimo ice auger uses a 33cc two-cycle gas engine to drill 8-inch holes. It weighs 25 pounds and features stainless steel blades for durability in dirty ice. The Quantum auger includes a centering ring for re-drilling. You will appreciate the fingertip throttle for precise control and the mitten-grip recoil for easy starting in cold weather. It is built for ice fishing on frozen lakes.

Pros
  • 33cc two-cycle engine provides reliable cold-weather power
  • Stainless steel blades hold their edge in dirty ice
  • Fingertip throttle trigger offers precise power control
  • Mitten-grip recoil allows starting while wearing gloves
Cons
  • 25-pound weight requires more effort to carry
  • Two-cycle gas engine needs fuel mixing and maintenance
Good fit if
  • You need an 8-inch hole for standard ice fishing gear
  • You prefer precise throttle control over automatic settings
  • You fish in conditions where re-drilling old holes is common
Skip if
  • You want to avoid mixing gas and oil for the engine
  • You prefer a lighter tool for carrying over long distances
  • You need a larger diameter hole for specialty fishing

Verdict: Eskimo 8-Inch Ice Auger fits anglers who value precise control and durability in dirty ice. It is a solid choice for those who do not mind the weight and maintenance of a gas-powered tool.

Specifications side by side

SpecEskimo S33Q8 33cc Gas Ice Auger
Auger Diameter8-Inch
Power Source2-Cycle Gas
Weight25 pounds
Engine Displacement33cc
Fishing TypeIce Fishing
Dimensions54 × 11 × 23 inches
Size8-Inch Auger
ColorRed
ModelS33Q8

Frequently asked questions

Is the Eskimo S33Q8 good for dirty ice?

Yes, this auger is best for precise control and re-drilling in dirty ice. The 33cc engine provides enough torque to cut through thick, hard ice without stalling. This power level is suitable for most standard ice fishing conditions where debris might slow down smaller units.

What size hole does the S33Q8 drill?

It features an 8-inch Quantum auger. This size is standard for many ice fishing applications. The stainless steel blades ensure clean cuts. You get a consistent hole diameter that works well for various ice fishing techniques and gear setups.

How heavy is the Eskimo S33Q8 auger?

The unit weighs 25 pounds. This mass helps you maintain stability on the ice during operation. The tubular steel handlebars and foam grips also contribute to the overall weight. You should consider this weight when transporting the auger over long distances.

Does the S33Q8 have a recoil starter?

Yes, you engage the engine using a mitten-grip recoil starter. This design ensures you can pull the cord effectively even while wearing thick winter gloves. It allows for reliable starting in cold conditions without requiring external power sources or complex ignition systems.

What are the dimensions of the Eskimo S33Q8?

The auger measures 54 inches in length and 11 inches in width. The height is listed as 23 inches. These dimensions help you gauge storage space requirements. The length also aids in maneuvering the tool on uneven ice surfaces.

Is the S33Q8 suitable for beginners?

It fits anglers who value precise control and durability. You get a fingertip throttle trigger to adjust power output precisely before starting. However, you must mix fresh oil with gasoline before every use. This maintenance requirement means it is better for those willing to handle gas tool upkeep.

What type of engine does it use?

It uses a 33cc two-cycle engine. This engine size provides enough torque to cut through thick ice. You need to mix oil with gasoline for operation. The two-cycle design is common for gas-powered ice augers, offering a balance of power and weight.

See also