As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This longrun 8 inch ice auger review covers a manual drilling solution for ice fishing. It connects to your cordless drill for power. The bit features an 8-inch diameter for wide holes. It also includes a 35.95-inch extended reach shaft. This length helps you drill deep holes in thick ice. The design uses hardened carbon steel blades. These blades cut aggressively while resisting buildup. The shaft is made from powder-coated steel. This build resists rust and weathering. You get replaceable blades to extend life. The kit includes an adapter with a handle. It also comes with protective gloves and a blade cover. This setup is built for outdoor durability.
- 8-inch diameter cutting head for wide access
- 35.95-inch extended reach shaft for deep holes
- Hardened carbon steel blades with spiral pattern
- Replaceable high-alloy carbide stainless steel blades
- Powder-coated steel body resists rust and chipping
Good fit for
You should consider this auger if you already own a cordless drill. It relies on your tool for power. The 35.95-inch shaft suits anglers targeting bottom feeders. It helps you reach deeper water. The replaceable blades make it cost-effective over time. You can swap worn blades instead of buying new bits. The powder-coated steel resists harsh weather. This build works well for rough handling. The included handle provides better control. You get steady, vertical drilling. This option fits those who want a durable, manual solution.
Who can skip it
Skip this model if you need a self-contained power source. It requires a cordless drill to operate. You cannot use it by hand alone. The 8-inch diameter creates large holes. This may not suit those preferring smaller holes. The manual nature demands physical effort. You must apply vertical pressure. The shaft is 35.95 inches long. This length might be cumbersome in tight spaces. If you want a lightweight, quick-setup option, look elsewhere. This auger is built for steady, deep drilling. It is not designed for speed or portability.
Verdict
This auger offers a durable, deep-drilling solution for anglers with cordless drills. The replaceable blades and weather-resistant build support long-term use.
Key specs explained for this auger
Power Source: Cordless Drill
This auger does not have a built-in motor. You must attach it to your own cordless drill. This makes the tool lighter and more portable than gas or electric models. You can use any compatible drill you already own. Check your drill's torque output to ensure it can handle thick ice. This setup reduces upfront cost since you are not buying a dedicated motor.
Auger Diameter: 8 in
The cutting head creates a hole eight inches wide. This diameter is standard for most ice fishing rods and tip-ups. It provides enough space to land medium-sized fish without struggle. Smaller augers may restrict rod movement. Larger augers require more power and effort. This size balances ease of drilling with sufficient opening for your gear.
Length: 29 inches
The total length of the auger body is twenty-nine inches. This measurement helps you gauge storage space and handling. A shorter tool is easier to carry on the ice. It fits into most vehicle trunks and gear bags. Consider this dimension when planning your transport. It ensures the tool remains manageable while you move between fishing spots.
Color: Red
The auger features a red finish on its body. Bright colors improve visibility on white snow and ice. You can spot the tool quickly if you set it down. This reduces the risk of leaving it behind or tripping over it. Color options may vary. Choose a bright shade to ensure the auger remains easy to find during active fishing sessions.
Design and Build Quality
The Longrun 8-Inch Ice Auger features a heavy-duty powder-coated steel construction. This finish aims to prevent chipping, rusting, and weathering during outdoor use. The listing notes it withstands impact and maintains durability even with rough handling and storage. You get two color options: Red or Yellow. The body is described as lightweight aluminum, while the cutting head uses hardened carbon steel blades. These blades are high-alloy carbide stainless steel. This material choice helps retain sharp edges and resists buildup in freezing temperatures. You can replace the blades when they dull, extending the tool's life without buying a new bit.
According to the listing, the shaft measures 35.95 inches in extended reach. This length provides enhanced leverage and control for boring deep, straight holes. The design includes an anti-wobble rigid structure to allow safe vertical pressure. The overall dimensions are listed as 29 inches in length, 7.97 inches in height, and 8 inches in width. The 8-inch diameter creates wide holes for accessing deep water. You attach this auger to your own cordless drill. This manual power source keeps the tool portable and lighter than gas models. The included adapter with a handle and protective blade cover adds to the layout. You also receive protective gloves for safety during operation.
Setup And Everyday Use
You set up this auger by attaching it to your cordless drill. The listing includes an adapter with a handle, which simplifies the connection process. You also receive a protective blade cover and gloves for safety. The tool relies entirely on your drill’s torque to function. It does not have a built-in motor, so you must ensure your power tool is compatible and sufficiently powerful for the task. The 8-inch diameter requires significant force to cut through thick ice layers. You apply vertical pressure to bore straight holes. The extended 35.95-inch shaft provides leverage and control during this process. This length helps you reach deeper water and target bottom feeders effectively. The rigid design aims to minimize wobble, ensuring precision in your drilling. Daily use involves managing the weight and balance of the extended shaft. The lightweight aluminum body helps reduce fatigue compared to heavier models. You will need to manage the spiral pattern on the blades to prevent ice buildup in freezing temperatures. The hardened carbon steel blades are designed to retain sharp edges, but you may need to replace them over time. The listing notes that blades are replaceable, allowing you to maintain performance without buying a new unit. The powder-coated steel construction resists rust and chipping, which supports durability during rough handling and storage. You should store the tool in a dry place to maintain its condition. The included protective gloves add a layer of safety during operation. This setup is practical for anglers who already own a compatible drill and prefer a manual, portable solution for ice fishing.
What You Need To Know Before Buying
You need a compatible cordless drill to operate this Longrun auger. Check your drill’s chuck size and torque output before purchasing. The listing specifies it connects via an included adapter, but you must ensure your tool fits securely. This auger relies entirely on your drill’s power, so a weak battery may struggle in thick ice. You should also verify your drill’s speed settings for optimal cutting. Regular upkeep involves cleaning the spiral blades to prevent ice buildup and storing the unit in a dry place to preserve the powder-coated finish. The replaceable carbide blades extend the tool’s life, but you must have spare blades on hand for future maintenance. This manual option sits alongside powered models in our 1-product guide. It suits anglers who prioritize portability and lower weight over automatic drilling speed. You save effort by not carrying a heavy motor, but you still provide the rotational force. This makes it a practical choice for those who already own a robust drill.
Check before you buy
- Verify your cordless drill chuck size fits the included adapter.
- Check your drill’s torque rating for thick ice conditions.
- Purchase spare replaceable blades for long-term maintenance.
- Ensure your drill battery is fully charged for deep holes.
Longrun 8-Inch Ice Auger
Best for: drilling deep holes in thick ice
- Auger Diameter
- 8 in
- Power Source
- Cordless Drill
- Fishing Type
- Ice Fishing
- Dimensions
- 29 × 8 × 7.97 inches
This Longrun ice auger is a 8-inch diameter drill bit designed for cordless power drills. It features a 35.95-inch extended shaft for deep ice penetration and hardened carbon steel blades. The powder-coated steel body resists rust and chipping. You will find this tool practical for drilling straight, deep holes in thick ice layers. It suits anglers who need leverage and control for bottom-feeding species.
- 8-inch diameter cuts wide holes
- 35.95-inch extended shaft for deep reach
- Hardened carbon steel blades stay sharp
- Replaceable blades extend tool life
- Powder-coated steel resists rust and chipping
- Requires a separate cordless drill to operate
- 29-inch length may be cumbersome for tight spaces
- 8-inch diameter creates larger holes than standard augers
- You target bottom feeders in deep ice
- You already own a compatible cordless drill
- You need leverage for thick ice layers
- You prefer manual augers for portability
- You lack a cordless drill for power
- You want a smaller diameter hole
Verdict: Longrun 8 Inch Ice Auger fits anglers drilling deep, straight holes in thick ice who already have a power drill. Its extended shaft and replaceable blades make it a durable option for serious ice fishing.
Specifications side by side
| Spec | Longrun 8-Inch Ice Auger |
|---|---|
| Auger Diameter | 8 in |
| Power Source | Cordless Drill |
| Fishing Type | Ice Fishing |
| Dimensions | 29 × 8 × 7.97 inches |
| Size | 8 Inch Ice Fishing Auger |
| Color | Red |
Frequently asked questions
Does the Longrun 8-inch auger come with a drill?
No, it does not include a drill. You must provide your own compatible cordless drill to operate the tool. The package includes an adapter with a handle to help you connect the auger securely to your existing power source. This design keeps the unit lightweight and portable for transport to remote fishing spots.
What is the total length of the auger shaft?
The auger features a 29-inch length overall. This extended shaft design allows you to drill deeper holes in thick ice sheets. It ensures you can reach clear water even when the ice layer is substantial. The 8-inch diameter provides a wide opening for larger fish.
Is the auger made of steel?
Yes, it is constructed from heavy-duty steel. The listing specifies a powder-coated finish to resist chipping, rusting, and weathering. This material choice aims to withstand impact and rough handling during storage. It is built for durability in cold, wet ice fishing environments.
What color is the Longrun ice auger?
The auger is red. This color helps the tool stand out against the white snow and ice on the lake surface. It makes the equipment easier to locate if you set it down near your fishing hole. The bright finish complements the steel construction.
Are replacement blades included?
The listing indicates the auger has replaceable blades. This feature extends the lifespan of the tool by allowing you to swap out worn cutting edges. It ensures consistent drilling performance over time. You do not need to replace the entire auger when the blades dull.
Does it work with gas augers?
No, it is designed for manual power drills only. It connects to cordless electric drills via the included adapter. It is not compatible with gas-powered auger motors. You must ensure your drill has sufficient torque to drive the 8-inch bit through thick ice effectively.
