As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This yakattack cellblok switchblade transducer arm review covers a unified system for kayak anglers. The CellBlok is a track-mounted battery box paired with a specialized transducer arm. It weighs 1.4 pounds and measures 14 inches in length. The interior space measures 6.375 x 4.25 x 2.60 inches. This compact design fits 10ah batteries while supporting modern cable wraps. The SwitchBlade arm features a hydrodynamic shape to reduce drag. It mounts to most factory or aftermarket track systems. You get a streamlined setup without drilling holes in your hull.
- Track-mounted battery box with 6.375 x 4.25 x 2.60 inch interior space
- SwitchBlade transducer arm reduces drag and folds compactly
- No-drill installation using two knobs for attachment
- Compatible with MightyMount, GearTrac, and most track systems
- Weighs just 1.4 pounds for lightweight performance
Good fit for
You should choose this setup if you fish from a kayak and want a clean, integrated solution. The track-mounted design suits those who use MightyMount, GearTrac, or similar track systems. The compact 1.4-pound weight is ideal for anglers prioritizing low mass. The included cable wraps support modern fish finder units. If you need to mount a 10ah battery securely without drilling, this system provides a straightforward, secure attachment method for your electronics.
Who can skip it
You should look elsewhere if your kayak uses FeelFree, 3 Water, or Jonny Boats tracks, as the base model does not include the necessary adapter. You might also skip this if you require a battery larger than 10ah, given the specific interior dimensions. The system is designed for track mounting only, so it will not fit boats without compatible track systems. Additionally, if you prefer a standalone battery box without the integrated transducer arm, this all-in-one unit may be too specialized for your needs.
Verdict
This system offers a clean, track-mounted solution for kayak anglers using compatible tracks. It combines battery storage and transducer mounting into one lightweight unit.
Key specs explained
Weight: 1.4 pounds
This low mass keeps your kayak balanced and reduces the load on your track system. You can move the unit easily without straining your back or affecting the boat's stability. Compare this to heavier battery boxes that add unnecessary drag and weight to your setup.
Interior space: 6.375" x 4.25" x 2.60"
These dimensions define the volume available for your power source. This size is designed to fit standard 10ah batteries securely inside the box. Check your battery’s physical size against these measurements to ensure a proper fit before purchasing, as larger units may not fit.
Length: 14 inches
The total length determines how much deck space the unit occupies on your kayak. This footprint allows for a compact installation that does not overwhelm your fishing area. Measure your available track length to ensure the arm and box fit within your existing gear layout.
Width: 6 inches
The width affects how the unit sits on your track rails. A six-inch width provides a stable base for the battery box and transducer arm. Ensure your kayak’s track system can accommodate this width without interfering with other mounted accessories or your seating position.
Design and build overview
The CellBlok Switchblade is a track-mounted system designed for kayak fishing. According to the listing, the unit weighs 1.4 pounds and measures 14 inches in length. The height is 5 inches, and the width is 6 inches. These dimensions allow it to fit into standard track systems without excessive bulk. The lightweight construction helps maintain your kayak's balance. You can move the setup easily without straining your back or affecting stability. The interior space measures 6.375 by 4.25 by 2.60 inches. This volume accommodates 10ah batteries. Larger cable wraps support modern fish finder units. The layout keeps power and transducer functions in one place. This reduces clutter on your deck.
The finish is available in Black, Battleship Grey, or YakAttack Orange. The materials are chosen for durability in wet environments. The Switchblade transducer arm features a patented hydrodynamic design. This shape reduces gurgle and drag while you paddle. The arm folds compactly when not in use. You can customize its length for side imaging or standard transducers. Installation requires no drilling. You attach or remove the system by loosening two knobs. This provides a secure fit without permanent holes. The design works with MightyMount, GearTrac, and most factory track systems. An adapter is available for other brands. This flexibility ensures you can integrate the unit into your existing gear. The all-in-one solution streamlines your fish finder setup. You get power and transduction in a single, manageable package.
Setup and everyday use
You install this system by attaching it to your kayak’s track. It fits Yak Attack MightyMount and GearTrac tracks, as well as most factory or aftermarket options. If you use a FeelFree, 3 Water, or Jonny Boats track, you need an adapter. The design uses a no-drill approach. You do not need to make holes or run complex wiring. This keeps your hull clean and avoids potential leaks. To attach or remove the unit, you simply loosen two knobs. This makes the process quick and secure. You can swap the entire fish finder setup without tools. The Switchblade transducer arm features a patented design. It folds compactly when not in use. You can customize its length for standard or side imaging transducers. The hydrodynamic shape aims to reduce drag and water gurgle. Inside the box, you have space for a 10ah battery. The interior measures 6.375 by 4.25 by 2.60 inches. Larger cable wraps support modern units. The unit weighs 1.4 pounds. This low mass helps keep your kayak balanced. You move it easily without straining your back or affecting stability. The system offers an all-in-one solution for power and transduction. You get a streamlined setup that saves deck space. The black finish is standard, though other colors are available. You mount it once and adjust as needed for your fishing style.
Before You Buy
You need to verify your kayak track type. The CellBlok fits MightyMount and GearTrac systems. It also works with most factory or aftermarket tracks. If you use a FeelFree, 3 Water, or Jonny Boats track, you must buy a separate adapter. Check your battery size. The box holds 10ah batteries. The interior measures 6.375 by 4.25 by 2.60 inches. Larger cable wraps support modern fish finders. You should also check your transducer type. The Switchblade arm can be customized for side imaging or standard units. This flexibility matters if you upgrade your sonar later. Keep the knobs clean. Salt and dirt can cause them to stick. Wipe them down after each trip. This unit sits alongside other track-mounted solutions. It offers a streamlined setup without drilling holes. You get power and transducer mounting in one place. This reduces clutter on your deck. It is a practical choice for kayak anglers who want a clean look.
Check before you buy
- Verify your kayak track brand and model.
- Confirm your battery fits the 10ah size.
- Check if you need an adapter for your track.
- Decide between side imaging or standard transducer.
YakAttack CellBlok Battery Box & Transducer Arm
Best for: Kayak anglers using track mounts
- Fishing Type
- Kayak Fishing
- Dimensions
- 14 × 6 × 5 inches
- Weight
- 1.4 pounds
The YakAttack CellBlok Switchblade Transducer Arm is a track-mounted battery box and fish finder setup for kayak fishing. It weighs 1.4 lbs and measures 14 inches long. The internal space fits 10ah batteries. The patented SwitchBlade arm reduces drag and folds compactly. This system allows for no-drill installation on most factory or aftermarket track systems. It suits anglers who want a streamlined, lightweight power solution.
- Weighs only 1.4 lbs for lightweight performance
- Patented SwitchBlade design reduces drag and folds compactly
- No-drill installation via track-mount system
- Internal space fits 10ah batteries
- Internal capacity is limited to 10ah batteries
- Weight of 1.4 lbs may be heavier than minimal setups
- You need a lightweight, track-mounted power solution
- You want to avoid drilling holes in your kayak
- You use standard or side imaging transducers
- You require battery capacity larger than 10ah
- You do not use track-mount systems on your kayak
- You prefer a fully integrated electronic unit without separate arms
Verdict: YakAttack CellBlok Switchblade Transducer Arm offers a lightweight, 1.4 lb solution for kayak anglers using track mounts. It fits 10ah batteries and reduces drag with its foldable arm design. It is ideal for those seeking a secure, no-drill fish finder setup.
Specifications side by side
| Spec | YakAttack CellBlok Battery Box & Transducer Arm |
|---|---|
| Fishing Type | Kayak Fishing |
| Boat Type | Kayak |
| Dimensions | 14 × 6 × 5 inches |
| Weight | 1.4 pounds |
| Color | Black |
| Model | CLB-1003 |
Frequently asked questions
Does the YakAttack CellBlok Switchblade fit standard kayak tracks?
Yes, it mounts to track systems. It is designed for Yak Attack MightyMount and GearTrac tracks. It also works with most factory or aftermarket options. If you use a FeelFree, 3 Water, or Jonny Boats track, you need a separate adapter. Verify your track type before purchasing to ensure compatibility.
What battery capacity does the CellBlok support?
The unit fits 10ah batteries. This capacity provides power for your fish finder and other electronics. The interior space is sized to hold this specific battery size securely. This setup keeps your gear organized and reduces drag on your kayak while fishing.
How heavy is the YakAttack CellBlok transducer arm?
The system weighs 1.4 pounds. This lightweight design helps maintain your kayak's balance. It reduces the load on your track system compared to heavier alternatives. You can move the unit easily without straining your back or affecting the boat's stability during your fishing trip.
What are the dimensions of the CellBlok unit?
The unit measures 14 inches in length, 6 inches in width, and 5 inches in height. These compact dimensions allow it to fit securely on your kayak. The size is optimized for kayak anglers who need a low-profile setup that does not interfere with paddling or casting.
Is the CellBlok Switchblade suitable for kayak fishing?
Yes, it is designed specifically for kayak fishing. The foldable arm reduces drag when not in use. It offers a secure, no-drill fish finder setup. This makes it ideal for anglers seeking a lightweight solution that integrates seamlessly with their track mount system for a stable fishing experience.
What color is the YakAttack CellBlok?
The unit is black. This color helps it blend with most kayak hulls and electronics. The black finish is durable and suitable for outdoor use. It maintains a clean look on your kayak while providing reliable performance for your fishing gear and battery storage needs.
